Atdec Telehook TH-WH-PJ-CM Technical specs - Manual

TM
Dimensions
Technical Specifications
Projector Ceiling Mount |Pole
Ceiling Plate Specifications
(not to scale)
Projector
NOTE: 4 sets of Extension Bracket lengths are
included to suit most mounting configurations.
Any combination of these brackets may be used.
2x100mm (4”) 2x50mm (2”)
2x75mm (3”)
Minimum reach = 65mm (2 ”)
(from centre of bracket)
9
16
65mm
(2 ”) 9 16
200mm
(7 ”) 7 8
Maximum reach = 200mm (7 ”)
(from centre of bracket)
7 8
2x150mm (5 ”) 7
8
Projector mounting screws and washers included:
- M2.5x15 (x4)
- M3x15 / M3x20 (x4 each)
- M4x15 / M4x20 / M4x25 / M4x30 ...... (x4 each)
- M5x15 / M5x20 / M5x25 / M5x30 ...... (x4 each)
- M6x15 / M6x20 / M6x25 / M6x30 ...... (x4 each)
- Washer 10mm / 8mm (x4 each)
Mounting hardware included:
- Nylon Anchor Plug (x4)
- 14 Guage Coach Screw (x4)
- Washer 20mm (x4)
Warranty: 10 years limited
NOTE: - This product has been designed to suit
90% of projectors.
- Maximum load =15kg (33lbs).
- Mounting hardware included.
11 16 11 16
TH-WH-PJ-CM
Pitch
+/- 20° Roll
+/- 20°
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 09.03.11 ©
Tube diameter
outside = 35mm
inside = 30.7mm
Tube diameter
outside = 40mm
inside = 36.2mm