Atdec Adaptor AC-AP-4040 Installation manual - Manual

Installation Instructions AC-AP-4040
400x400mm
Component Checklist
Hardware
IMPORTANT INFORMATION
! IMPORTANT - Install 400x400mm Adaptor Plate as per Installation Instructions.
! Compatible with Telehook: TH-1032-VFM, TH-1040-VFM, TH-1040-CTS, TH-1040-CTL, TH-1040-CT-B2B, TH-2040-VTR, TH-2250-VTP.
! This product supports a maximum load of 25kg (55lbs).
! This product supports VESA mounting hole patterns: 200x300mm, 200x400mm, 300x200mm, 300x300mm,
300x400mm, 400x200mm, 400x300mm, 400x400mm (see below for Mounting Configurations).
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware above.
Tools Required:
10mm (
3 /
8
”) socket wrench
or Shifter
Step 2. Attach Adaptor Plates to Mounting Plate
Washer (x4) Nylock Nut (x4)
Adaptor Plates
(x2)
Adaptor Plate
(x2)
Mounting Plate
Nylock Nut
(x4)
Washer
(x4)
400x400mm
400x300mm
400x200mm
300x300mm
300x200mm
200x300mm 400x400mm
300x400mm
300x300mm
300x200mm
200x400mm
200x300mm
Mounting Configurations:
The Adaptor plates can be fixed vertically or horizontally.
Each configuration offers different VESA mounting hole configurations.
HORIZONTAL
VERTICAL
(most common)
INSTALLATION COMPLETE - Refer to the Telehook product Installation Instructions.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 01.08.11 ©
Adaptor plate