Atdec Spacedec SD-SA-DW product brochure - Manual

Acrobat | Swing arm wall
The SD-SA-DW wall mount helps to conserve valuable desk space by mounting
monitors on a wall. This leaves a monitor footprint of zero and creates an extremely
productive workspace, free from clutter. Offers the ultimate in versatility. With two
separate pivot/adjustment points, the user has excellent control over their monitor
position in terms of height, swing, tilt and screen rotation. Height adjustment is
effortless due to the monitor weight counter balancing gas strut mechanism which
glides the monitor into position. Screen tilt and pan of up to 40° is also made simple
with a ball joint integrated into the arm to position the screen for the optimum
viewing angle. Combined, these features ensure that all adjustments can be made
from a seated position.
Product key features:
Offers a wide range of movement via 2 pivot points
Ball joint mechanism allows 40 degrees of display adjustment in any direction from the vertical plane
Portrait to landscape rotation
Arm maximum reach: 375mm (14.75”)
Display height adjustment range: 460mm (18”)
Bolt through and desk clamp mounting options included
Integrated cable management
Comes with all mounting hardware
Mounting hole pattern:
75mm x 75mm;
100mm x 100mm
SD-SA-DW
Weight carrying capacity:
Minimum 3kg (6.6lbs), maximum 9kg (19.8lbs)
Atdec North America www.atdec.com
Atdec Global www.atdec.com.au
Fits most displays from 12" to 24"
Gas strut mechanism for
effortless display adjustment
from a seated position
Ball joint mechanism
allows display adjustment
of 40° in any direction
Offers a wide range
of movement via 2
pivot points
Portrait to
landscape rotation
Integrated cable management