B&W Trailer Hitches Turnoverball Model 1197 (Ford) - Manual

Turnoverball TM Gooseneck Hitch Installation Instructions
B&W Trailer Hitches
1216 HWY 224 / PO Box 186
Humboldt, KS 66748
800.248.6564
620.473.3664
Fax:620.473.3766
[email protected]
www.turnoverball.com
Parts List
1 - Rear Crossmember
2 - Front Crossmember
3 - Center Section
4 - Sideplate
5 - Sideplate
6 - Safety Chain U-Bolts
7 - Latch Pin Release Handle
8 - 2-5/16” Ball
9 - Springs
10 - 1/2” Lock Nuts
Model 1197R
Copyright 2011
B&W Custom Truck Beds, Inc.
ALL RIGHTS RESERVED 1197R - 04 19 2011
Hardware Kit
2 - 7/8”x 2 1/2” Cap Screw
2 - 7/8” Finish Nut
2 - 7/8” Lock Washer
2 - 7/8” Flat Washer
10 - 1/2” x 1 1/2” Gr8 Cap Screw
10 - Gr8 Finish Nut
10 - 1/2” Lock Washer
14 - 1/2” Flat Washer
4 - 7/16”x1 1/2” Gr8 Cap Screws
4 - 7/16” Gr8 Finish Nut
4 - 7/16” Lock Washer
4 - 7/16” Flat Washer
Safety Chain Kit
2 - 1/2” U-Bolts
4 - 1/2” Lock Nuts
4 - Springs
1 - 3/8”x3/4” Bolt
1 - 3/8” Lock Nut
Ford (1997-2003) and 2004 Ford Heritage (Old body Style)
1/2 Ton & Light 3/4 Ton, Short and Long Bed
Light Duty Body Style
Except 1997 Ford w/ Air Bag Overloads
NOTE: We recommend reading instructions before beginning the installation.
WARNING: The tow vehicle’s towing capacities should under NO circumstances be exceeded.