Milton CAT TL943 - Manual

Engine
Model Cat ® 3054C DIT
Gross Power (Basic) 74 kW 99 hp
Net Power (Basic) 70.4 kW 94.5 hp
• Net Power shown is the power available at the flywheel
when equipped with fan, air cleaner, muffler and alternator.
Weights
Operating Weight 11 814 kg 26,050 lb
Operating Specifications
Rated Load Capacity 4082 kg 9,000 lb
Maximum Lift Height 13.1 m 43 ft
Maximum Forward Reach 9.6 m 31.5 ft
Frame Leveling 10°
Top Travel Speed 28.3 kph 17.6 mph
Capacity at Max Height 3175 kg 7,000 lb
Capacity at Max Reach 544 kg 1,200 lb
Turning Radius over Tires 3.7 m 12 ft
Hydraulic System — Implement
Gear Pump Tandem
System Operating Pressure 276 bar 4,000 psi
Auxiliary Hydraulic Pressure 207 bar 3,000 psi
Auxiliary Hydraulic Flow 38 L/min 10 gal/min
at Boom Head
• Auxiliary Hydraulic Circuit used for all attachments equipped
with cylinders or other hydraulic components. Consists of valves,
controls and hydraulic lines.
Service Refill Capacities
Fuel Tank 144 L 38 gal
Hydraulic System 151.4 L 40 gal
Tires
Standard 13.00 x 24-12 PR
Optional 13.00 x 24 Foam Filled
13.00 x 24 Rock Lug
13.00 x 24 Solid
Transmission Speeds
Forward 4 speed
Reverse 3 speed
Boom Performance
Boom Up 11.8 Seconds
Boom Down 9.1 Seconds
Tele In 12.9 Seconds
Tele Out 14.7 Seconds
Drawbar Pull (Loaded) 100.65 kN 22,619 lb
Axles
• Trunnion mounted planetary 55 degree steer axles.
• Integral steer cylinder.
• High bias limited slip differential on front axle.
Brakes
• Service Brakes are inboard wet disc brakes on front and rear axles.
• Parking Brakes are spring-applied hydraulic release on front axle.
Light on dash indicates when brake is on.
Instruments
• Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water
temperature gauge. All gauges protected by clear acrylic cover.
Work Tools
Hydraulic Includes Includes
IT Coupler Auxiliary Electrics Auxiliary Electrics
Pallet Forks (2) 1524 mm, (2) 60 in, 2 in x 6 in
51 mm x 152 mm
(2) 1219 mm, (2) 48 in, 2.36 in x 4 in
60 mm x 102 mm
Cubing Forks (2) 1219 mm, (2) 48 in, 2 in x 2 in
51 mm x 51 mm
Standard Tilt
Carriage 1270 mm 50 in
Wide Tilt
Carriage 1829 mm 72 in
Standard Rotate
Carriage 1270 mm 50 in
Wide Rotate
Carriage 1829 mm 72 in
Swing Carriage 100°, 1829 mm, 4028 kg 100°, 72 in, 9,000 lb
Capacity, 2268 kg Swung Capacity, 5,000 lb Swung
Side Shift Carriage 1.22 m 48 in
Specifications
Cat
®
TL943
Telehandler