Milton CAT 535C - Manual (Page 9)

Governor Pedal. The governor pedal is
located to the right for more clearance
between the brake pedal, and for
improved operator comfort.
Single-lever Grapple Control. A single
four-function joystick control has top
mounted switches for grapple open and
close, tong rotate, and Auto-Grab System
activation. The control is simple,
convenient and easy to use.
Decking Blade Control. The decking
blade control is located on the right
side console. This location provides
for precise control for various decking
and clearing functions while reducing
operator fatigue.
Auto-Grab Switch. The Auto-Grab
system monitors and adjusts tong pressure
as needed to maintain a secure grip on
grapple loads.
Lock-up Torque Converter Drive.
When activated by a switch on the main
dashboard, the machine will automatically
switch between operation in fuel efficient
direct drive mode or torque converter
drive for maximum rimpull in tough
skidding applications.
Differential Lock Switch. Ergonomically
located rocker switch allows quick
engagement of differential locks
when needed.
Monitoring Controls. Conveniently
located and easy-to-see gauges and
displays make monitoring machine
systems as simple as possible.
Gauges. Four gauges indicate engine
coolant temperature, hydraulic oil
temperature, torque converter oil
temperature, engine rpm and fuel level.
Caterpillar Monitoring System.
Monitors fuel, temperatures, vital
electrical systems, gear speed and
direction. A three-level warning system
alerts the operator of potential
problems.
Additional. The right hand console has
a standard 12V outlet for powering
auxiliary equipment. The cab is pre-
wired and fitted for an entertainment
radio, and a CB type 2-way radio.
ROPS/FOPS. FOPS (Falling Object
Protection) and ROPS (Roll-Over
Protection) guards offer protection to
the operator and the machine.
9
AEHQ5671-01.qxd 2/18/10 12:55 PM Page 9