Milton CAT 16M - Manual (Page 15)

Moldboard Options. A 4.9 m (16 ft)
moldboard is standard on the 16M from
the factory. Left and right side moldboard
extensions are also available, increasing
versatility.
Ground Engaging Tools (GET). A wide
variety of Caterpillar GET is available
on the 16M, including cutting edges,
graderbits and end bits, all designed for
maximum service life and productivity.
Variable Float. The optional variable float
feature gives the operator the ability to
select the amount of down force the blade
has when it is in float. This allows the
operator to easily follow the contour of
the haul road when removing only the
loose material, increasing productivity
and cutting edge life.
Front Mounted Groups. A front mounted
push plate/counterweight can be ordered
on the 16M. A Caterpillar Work Tools
front lift group can be combined with a
front dozer blade for added versatility.
Compression Brake. The optional three-
phase compression brake enables higher
travel speeds downhill, while reducing
wear on brake components. This improves
overall productivity and lowers
maintenance costs.
Ripper. The 16M optional ripper is made
to penetrate tough material fast and rip
thoroughly for easier material movement
with the moldboard. The ripper includes
three shanks with the ability to add four
more if needed.
Automatic Lubrication System.
The optional Lincoln Centro-Matic
®
AutoLube System maintains the proper
grease lubrication on working surfaces,
significantly extending component life.
Contaminants are purged from open
pins and bushings to help prevent dirt
from damaging critical components.
Fast-Fill Fuel. The 16M offers a standard
Fast-Fill that allows customers to refuel
in less than two minutes for fast, accurate
filling and reduced downtime.
15
Work Tools and Attachments
The Work Tools and optional attachments for the 16M expand machine versatility, utilization
and performance.