Milton CAT 246C - Manual (Page 2)

Dimensions
1 Wheelbase 1240 mm 48.8 in
2 Length w/o Bucket 2979 mm 117.2 in
3 Length w/Bucket on Ground 3692 mm 145.3 in
4 Height to Top of Cab 2104 mm 82.8 in
5 Max. Overall Height 3998 mm 157.4 in
6 Bucket Pin Height at Max. Lift 3122 mm 122.9 in
7 Bucket Pin Height at Carry Position 200 mm 7.8 in
8 Reach at Max. Lift and Dump 600 mm 23.6 in
9 Clearance at Max. Lift and Dump 2425 mm 95.4 in
10 Ground Clearance 225 mm 8.8 in
11 Departure Angle 26°
12 Bumper Overhang Behind Rear Axle 1089 mm 42.8 in
13 Maximum Dump Angle 40°
14 Vehicle Width over Tires 1676 mm 66 in
15 Turning Radius from Center – Machine Rear 1730 mm 68.1 in
16 Turning Radius from Center – Coupler 1386 mm 54.6 in
17 Turning Radius from Center – Bucket 2167 mm 85.3 in
18 Max. Reach w/Arms Parallel to Ground 1388 mm 54.6 in
19 Rack Back Angle at Max. Height 85°
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow XPS
Quick Coupler, Mechanical or Hydraulic
Seat Belt, 50 mm (2 in) or 75 mm (3 in)
COMFORT PACKAGE (must select one of the following)
Open ROPS (C1): Suspension Seat (No Heater or Door)
Enclosed ROPS with Heat (C2): Cup Holder, Radio Ready,
Seat (choice of Suspension or Air Ride), Heater and Defroster,
Side Windows, Door (either Glass or Polycarbonate)
Enclosed ROPS with A/C (C3):
C2 + Air Conditioner
PERFORMANCE PACKAGE (must select one of the following)
Performance Package 1: One Speed
Performance Package 2: One Speed, Self Level
Performance Package 3: Two Speed, Self Level
Performance Package 4: Two Speed, Self Level, Ride Control,
Advanced Machine Information and Control System (AMICS)
STANDARD EQUIPMENT
ELECTRICAL
12 volt Electrical System
90 ampere Alternator
Ignition Key Start/Stop Switch
Lights:
Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen
Working Lights, Two Adjustable Front Halogen Lights, Dome Light
Backup Alarm
Heavy Duty Battery, 880 CCA
OPERATOR ENVIRONMENT
Gauges: Fuel Level, Hour Meter
Operator Warning System Indicators: Air Filter Restriction, Alternator
Output, Armrest Raised/Operator Out of Seat, Engine Coolant
Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic
Filter Restriction, Hydraulic Oil Temperature, Park Brake Engages
Vinyl Seat
Fold in Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised:
Hydraulic System Disables, Hydrostatic Transmission Disables, Parking
Brake Engages
ROPS Cab, Open, Tilt Up
FOPS, Level I
Top and Rear Windows
Headliner, Deluxe
Floor Mat
Interior Rearview Mirror
12 volt Electric Socket
Horn
POWER TRAIN
Cat ® C3.4 DIT Diesel Engine Meeting Tier 4 Interim/Stage IIIB
Emission Requirements
Air Cleaner, Dual Element, Radial Seal
S·O·S
SM Sampling Valve, Hydraulic Oil
Filters, Spin-on, Hydraulic
Filters, Bayonet-type, Fuel and Water Separator
Tilt Up Radiator/Hydraulic Oil Cooler
Spring Applied, Hydraulically Released, Parking Brakes
Hydrostatic Transmission
Four Wheel Chain Drive
OTHER
Engine Enclosure, Lockable
Extended Life Antifreeze, –37° C (–34° F)
Machine Tie Down Points (4)
Support, Lift Arm
Hydraulic Oil Level Sight Gauge
Radiator Coolant Level Sight Gauge
Radiator, Expansion Bottle
Cat ToughGuard™ Hose
Auxiliary, Hydraulics, Continuous Flow
Heavy Duty, Flat Faced Quick Disconnects
Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
Electrical Outlet, Beacon
Belly Pan Cleanout
OPTIONAL ATTACHMENTS
Counterweight
Beacon, Rotating
Engine Block Heater – 120V
Oil, Hydraulic, Cold Operation
Paint, Custom
AM/FM/Weather Band Radio with CD Player and Auxiliary Input Jack
1 12
2
3
4
10 7
8
9
6
5 15
14
16
17
18
11
13
19
246C Skid Steer Loader
AEHQ5858-02 (3-12)
Replaces AEHQ5858-01
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2012 Caterpillar
All Rights Reserved
Printed in U.S.A.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.