Milton CAT TH255 - Manual

Engine
Model Cat ® C4.4 Tier 3 DIT
Rated Speed 2,200 rpm
Displacement 4.4 L 266 in 3
Gross Power (Max) 63 kW 84 hp
Weights
Operating Weight with
Carriage and Forks 4899 kg 10,800 lb
Operating Specifications
Rated Load Capacity 2500 kg 5,500 lb
Maximum Lift Height 5.6 m 18 ft 4 in
Maximum Forward Reach 3.3 m 10 ft 10 in
Top Travel Speed 29 kph 18 mph
Gradeability w/ 2500 kg
Load Capacity 45% 45%
Capacity at Max Height 2000 kg 4,400 lb
Capacity at Max Reach 816 kg 1,800 lb
Turning Radius over Tires 3200 mm 126 in
Hydraulic System — Implement
Gear Pump Single-section
Auxiliary Circuit Operating Pressure 24821 kPa 3,600 psi
Auxiliary Hydraulic Flow
at Boom Head 20 gpm
• Auxiliary Hydraulic Circuit used for all attachments equipped
with cylinders or other hydraulic components. Consists of valves,
controls and hydraulic lines.
Service Refill Capacities
Fuel Tank 91 L 24 gal
Hydraulic System 98 L 26 gal
Tires
Standard 12.00 x 16.5
Optional 14.00 x 17.5
Transmission Speeds
Transmission Hydrostatic
Forward Variable Speed
Reverse Variable Speed
Boom Performance
Boom Up 6.2 Seconds
Boom Down 4.3 Seconds
Tele In 3.4 Seconds
Tele Out 6.3 Seconds
Drawbar Pull (Loaded) 3946 kg 8,700 lb
Axles
• Planetary on front and rear axles.
• High bias limited slip differential on front axle.
Brakes
• Service Brakes are inboard wet disc brakes on front axle.
• Parking Brakes are wet disc spring-applied hydraulic release.
Light on dash indicates when brake is on.
Instruments
• Indicators for machine hours, fuel-level, steer mode, steering
pressure, battery charge, coolant temperature, parking brake and
engine pre-heat.
• Reverse motion alarm.
• Panel and switches are illuminated for night operation.
Work Tools
Standard Tilt 1219 mm 48 in
Carriage
Side Tilt (Rotate) 1219 mm
48 in
Carriage
Side Shift
1219 mm 48 in
Carriage
Pallet Forks
(2) 1219 mm, (2) 48 in, 2 in x 4 in
51 mm x 102 mm
Lumber Forks (2) 1524 mm, (2) 60 in, 1.5 in x 6 in
38 mm x 152 mm
Cubing Forks (2) 1219 mm, (2) 48 in, 2 in x 2 in
51 mm x 51 mm
Light Material 1.3 m 3 (1.7 yd 3 ) 1.8 m (72 in)
Bucket
General Purpose .76 m
3 (1.0 yd 3 ) 1.85 m (73 in)
Bucket
Grapple Bucket
.76 m 3 (1.0 yd 3 ) 1.8 m (72 in)
Lifting Hook 2500 kg 5,500 lb
Specifications
Cat
®
TH255
Telehandler