Milton CAT 924Hz - Manual (Page 11)

11
Operating Specifications
Pin-on Buckets
With Bolt-On With Bolt-On With Bolt-On
Cutting Edge Teeth & Segments* Teeth*
Rated bucket capacity (§) m 3 1.8 2.1 1.8 2.1 1.7 2.0
yd 3 2.4 2.7 2.4 2.7 2.2 2.6
Struck capacity (§) m 3 1.5 1.7 1.5 1.7 1.4 1.6
yd 3 2.0 2.2 2.0 2.2 1.8 2.1
Bucket width mm 2550 2550 2620 2620 2620 2620
ft/in 8'4" 8'4" 8'7" 8'7" 8'7" 8'7"
10 Dump clearance at full lift and 45° discharge (§) mm 2826 2757 2722 2653 2722 2653
ft/in 9'3" 9'1" 8'11" 8'8" 8'11" 8'8"
14 Reach at full lift and 45° discharge (§) mm 791 859 894 962 894 962
ft/in 2'7" 2'10" 2'11" 3'2" 2'11" 3'2"
Reach at 45° discharge and 2130 mm (7'0") mm 1318 1350 1365 1392 1365 1392
clearance (§) ft/in 4'4" 4'5" 4'6" 4'7" 4'6" 4'7"
Reach with lift arms horizontal mm 2059 2156 2205 2302 2205 2302
and bucket level ft/in 6'9" 7'1" 7'3" 7'7" 7'3" 7'7"
20 Digging depth (§) mm 43 51 56 64 56 64
in 1.7" 2.0" 2.2" 2.5" 2.2" 2.5"
6 Overall length mm 6898 7001 7044 7147 7023 7127
ft/in 22'8" 23'0" 23'1" 23'5" 23'1" 23'5"
13 Overall height with bucket at full raise (§) mm 4809 4936 4809 4936 4809 4936
ft/in 15'9" 16'2" 15'9" 16'2" 15'9" 16'2"
24 Loader clearance radius with bucket mm 5616 5646 5692 5722 5689 5719
in carry position (§) ft/in 18'5" 18'6" 18'8" 18'9" 18'8" 18'9"
Static tipping load straight (§) kg 8816 8732 8653 8565 8757 8671
lb 19,437 19,251 19,077 18,884 19,306 19,117
Static tipping load full 40° turn (§) kg 7640 7560 7477 7393 7581 7499
lb 16,844 16,667 16,484 16,299 16,713 16,533
Breakout force (§) kg 9954 8975 9833 8854 10 734 9604
lb 21,945 19,787 21,678 19,520 23,665 21,173
Operating weight kg 10 968 11 021 11 104 11 156 11 018 11 071
lb 24,180 24,297 24,480 24,595 24,291 24,408
Specifications shown are for 924Hz with cab with A/C, optional counterweight, limited slip axles, heavy duty rear brakes, additional guarding,
sound suppression, work tool, 80 kg (176 lb) operator and Michelin 20.5 R25 L3 XHA tires.
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standards specifies the cutting edge.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including
SAE-Standards J732 JUN92 and J742 FEB85 governing ratings.
Other Ground Engaging Tools available, consult your Cat dealer.