Milton CAT 316E - Manual (Page 15)

316E Hydraulic Excavator Specifications
Engine Drive Track
Engine Model Cat ® C4.4 ACERT™ Maximum 5.2 km/h 3.2 mph Number of Shoes 44 pieces
Net Power – 85 kW 113 hp
Travel Speed (each side)
SAE J1349 Maximum 156.2 kN 35,115 lbf Number of Track 7 pieces
Gross Power – 90 kW 120 hp
Drawbar Pull Rollers (each side)
SAE J1995
Bore
105 mm 4.13 in
Swing Mechanism
Number of Carrier
Rollers (each side) 2 pieces
Stroke 127 mm 5.00 in Swing Speed 9.3 rpm
Sound Performance
Displacement 4.4 L 269 in 3 Swing Torque 44.7 kN·m 32,969 lb ft
Operator – ISO 6396 71 dB(A)
Hydraulic System Service Refill Capacities
Spectator – ISO 6395 101 dB(A)
Main System –
Maximum Flow
(Total)
Swing System –
Maximum Flow
Maximum Pressure
– Equipment
Maximum Pressure
– Travel
Maximum Pressure
– Swing 300 L/min 79 gal
150 L/min 40 gal
35 000 kPa 5,076 psi
35 000 kPa 5,076 psi
22 600 kPa 3,278 psi
Fuel Tank Capacity
Cooling System
Engine Oil
(with filter)
Swing Drive
Final Drive (each)
Hydraulic System
(including tank)
Hydraulic Tank 290 L
24 L
13.5 L
2.4 L
5 L
190 L
106 L
76.61 gal
6.34 gal
3.57 gal
0.63 gal
1.32 gal
50.19 gal
28.00 gal
• When properly installed and maintained,
the cab offered by Caterpillar, when tested
with doors and windows closed according
to ANSI/SAE J1166 OCT98, meets OSHA
and MSHA requirements for operator
sound exposure limits in effect at time
of manufacture.
• Hearing protection may be needed when
operating with an open operator station
and cab (when not properly maintained or
doors/windows open) for extended periods
or in noisy environment.
Pilot System –
Maximum Flow 25.8 L/min 1,574 in 3 /
min
Standards
Pilot System –
Maximum Pressure
Boom Cylinder –
Bore 4120 kPa
110 mm
598 psi
4 in
Brakes
ROPS cab
Cab/OPG ISO 10265 2008
ISO 12117-2
ISO 10262 1998
Boom Cylinder –
Stroke 1193 mm 47 in
Stick Cylinder –
Bore 120 mm 5 in
Stick Cylinder –
Stroke 1331 mm 52 in
Bucket Cylinder –
Bore 110 mm 4 in
Bucket Cylinder –
Stroke 1039 mm 41 in
15