Printronix Scan Vision - Manual (Page 14)

12
SCANNER POSITIONING
Each SV100 has an attached label that indicates the type of scanner, focus distance and recommended scan
angle. Use the scan distance and scan angle information to mount the scanner per Figure 2.
Figure 4 – Scanner Positioning
Notes:
1. Scan distance is measured from the protruding edge of the face of the scanner.
2. Scan angle is measured in degrees relative to vertical from the surface of the bar code.
3. The scanner can be mounted in any orientation, the figure is meant to show the beam angle relative to
the bar code placement in the beam.