Trek PD07016 High-Voltage Power Amplifier - Manual

The Model PD07016 is a DC-stable, high-voltage power amplifier featuring an all solid-state design for high slew
rate, wide bandwidth, and low-noise operation. It is configured as noninverting with a fixed gain of 1000 V/V
and
is protected against over-voltage and over-correct conditions that may be generated by active loads or
by output short circuits to ground . Precision voltage and current monitors provide low-voltage
representations of the high-voltage output and load current for monitoring purposes or for use as
feedback signals in a closed-loop system.
The 4-quadrant, active output stage sinks or sources current to reactive or resistive loads throughout the
output voltage range. This is essential to achieve the accurate output response and high slew rates demanded
by reactive loads.
Trek Model PD07016
High-Voltage Power Amplifier
Key Specifications
!
Output Voltage Range:
! Output Current Range: ±300 mA
peak capability for 20 µs
! Slew Rate: Greater than 1000 V/
!
!
0 to ±10 kV DC or peak AC
0 to ±60 mA DC,0 to
µs
Large Signal Bandwidth DC to greater than 10 kHz
(2% distortion):
DC Voltage Gain: 1000 V/V
Typical Applications Include
! Automated or computer controlled systems
! Providing feedback signals in closed-loop systems
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Features and Benefits
! Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
Inverting and differential options available
!
!
!
!
!
!
!
All solid-state design for maintenance free operation
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
NIST-traceable Certificate of Calibration provided with each unit