Trek 10-40A High-Voltage Power Amplifier - Manual

The Model 10/40A is a DC-stable, high-voltage power
amplifier used in industrial and research applications
. It
features an all-solid-state design for high slew rate, wide
bandwidth and low-noise operation. The four-quadrant, active
output stage sinks or sources current into reactive or resistive
loads throughout the output voltage range.
This type of output is
essential to achieve an accurate output response and high
slew rate demanded by a variety of loads such as highly
capacitive or reactive loads. It is configured as a non-inverting
amplifier.
Trek Model 10/40A
High-Voltage Power Amplifier
Key Specifications
!
!
!
!
! Output Voltage Range:
Output Current Range:
peak AC
Slew Rate: Greater than 750 V/
0 to ±10 kV DC or peak AC
0 to ±40 mA DC or
µs
Large Signal Bandwidth (-3 dB): DC to greater than 23 kHz, typical
DC Voltage Gain: 1000 V/V
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Features and Benefits
!
!
!
!
!
!
!
! Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
All solid-state design for maintenance free operation
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
compliant
NIST-traceable Certificate of Calibration provided with each unit
Typical Applications Include
! Electrostatic deflection
! Electrophoresis
! Electrorheological fluids
! Electro-optic modulation
! Material poling
! AC or DC biasing
! Ion beam steering
! Particle accelerators
! Mass spectrometers
! Material characterization
! Ferroelectrics
! Atmospheric plasma
! Dielectric barrier discharge