Trek 10-10B-HS High-Voltage Power Amplifier - Manual

Typical Applications Include
! AC or DC biasing
Atmospheric plasma
Dielectric barrier discharge
Electroactive polymers (EAP)
Electrophoresis, electrophotography
Electrorheological fluids
Electrostatic deflection
! Electro-optic modulation
! Ferroelectric material characterization
! Ion beam steering
! Mass spectrometers
! Electrophoresis, electrophotography
! Electrorheological fluids
! Material poling and particle accelerators
!
!
!
!
!
!
The Trek Model 10/10B-HS is a DC stable high-speed high-
voltage power amplifier capable of precise control of output
voltages. It features an all-solid-state design for high slew rate,
wide bandwidth and low-noise operation. The four-quadrant,
active output stage sinks or sources current into reactive or
resistive loads throughout the output voltage range. This is
essential for monitoring the accurate output response and high
slew rates when driving reactive loads.
Trek Model 10/10B-HS
High-Speed High-Voltage Power Amplifier
Key Specifications
! Output Voltage Range:
! Output Current Range: peak AC for 1 ms
! Slew Rate: Greater than 700 V/
!
!
0 to ±10 kV DC or peak AC
0 to ±10 mA DC or 40 mA
µs
Large Signal Bandwidth (-3 dB): DC to greater than 19.5 kHz
DC Voltage Gain: Fixed at 1000 V/V
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • [email protected]
Features and Benefits
!
!
!
!
!
!
!
! Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
All solid-state design for maintenance free operation
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
compliant
NIST-traceable Certificate of Calibration provided with each unit