Trek 10-40A-hs High-Voltage Power Amplifier - Manual

The Model 10/40A-HS is a DC-stable, high-speed, high-
voltage power amplifier used in industrial and research
applications
. It features an all-solid-state design for high slew
rate, wide bandwidth and low-noise operation. The four-
quadrant, active output stage sinks or sources current into
reactive or resistive loads throughout the output voltage range.
This type of output is essential to achieve an accurate output
response and high slew rate demanded by a variety of loads
such as highly capacitive or reactive loads. It is configured as a
non-inverting amplifier.
Trek Model 10/40A-HS
High-Speed High-Voltage Power Amplifier
Key Specifications
!
!
!
!
! Output Voltage Range:
Output Current Range:
peak AC for 1 ms (must not exceed 40 mA rms max)
Slew Rate: Greater than 900 V/
0 to ±10 kV DC or peak AC
0 to ±40 mA DC or 120 mA
µs
Large Signal Bandwidth (-3 dB): DC to greater than 23 kHz, typical
DC Voltage Gain: 1000 V/V
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • [email protected]
Typical Applications Include
! Electrostatic deflection
! Electrophoresis
! Electrorheological fluids
! Electro-optic modulation
! Material poling
! AC or DC biasing
! Ion beam steering
! Particle accelerators
! Mass spectrometers
! Material characterization
! Ferroelectrics
! Atmospheric plasma
! Dielectric barrier discharge
Features and Benefits
!
!
!
!
!
!
! Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
All solid-state design for maintenance free operation
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
NIST-traceable Certificate of Calibration provided with each unit