Trek P0621 High-Voltage Power Amplifier - Manual

Trek Model P0621P (+) / P0621N (-) is a high-voltage DC-stable
piezo driver/amplifier designed to provide precise control of
output voltages in ranges that are customer specified within a
range of available settings. It is configured as a noninverting
amplifier with a variable DC gain. An inverting amplifier
configuration is also available.
The unit features an all-solid-state design, a high slew rate and a
four-quadrant active output stage which sinks or sources current
into reactive or resistive loads throughout the output voltage
range. This capability is essential for achieving the accurate
output responses and high slew rates demanded by reactive
loads.
Trek Model P0621P / P0621N
High-Voltage/Power DC Amplifiers
Key Specifications
! Output Voltage Range 0 to
! Output Current Range
! Slew Rate: Greater than 350 V/ (10% to 90%, typical)
!
!
+30 kV DC or peak AC (P0621P)
0 to -30 kV DC or peak AC (P0621N)
0 to ±20 mA DC or peak AC
µs
Large Signal Bandwidth DC to greater than 3.5 kHz (1% distortion)
! Small Signal Bandwidth: DC to greater than 25 kHz (-3 dB)
DC Voltage Gain: 3000 V/V
Typical Applications Include
! Closed-loop systems
! Automated or computer controlled systems
Features and Benefits
!
!
!
!
!
!
Four-quadrant
Closed loop system for high accuracy
Short-circuit protected for equipment protection
active output stage sinks or sources current into reactive or resistive loads throughout the output
voltage range
All solid-state design for maintenance-free operation
DC-stable for programmable supply applications
NIST-traceable Certificate of Calibration provided with each unit
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804