Trek 152-1 Resistance Meter - Manual

Model 152-1
Resistance Meter
The Trek Model 152-1 Surface/Volume Resistance Meter is
designed to precisely measure surface or volume resistance on
a wide variety of conductive, dissipative, and insulative
materials. The Model 152-1 employs a measurement
technique which conforms to ANSI/ESD Association standards
for measuring surface resistance, resistivity, and volume
resistance including STM2.1 for garments, S4.1 for work
surfaces, S7.1 for flooring, STM9.1 for footwear, STM11.11 for
planar materials,
STM11.13 for two point resistance
measurement nd STM97.1 for floor materials/footwear. A
variety of measuring probe electrode configurations are
available and are purchased separately.
The Model 152-1 features exceptional measurement accuracy
3 13 and wide measurement ranges of 10 to 10 Ω using point-to-
point probes or the two-point resistance probe for small surface
area measurements. When used with the exclusive 152P-CR-1
concentric ring probe that contains a pre-amplifier, the usual
noise, stray pickup and long settling time associated with other
concentric ring probe designs is eliminated, thus providing ease
of operation even at very high resistance values.
The electrode test voltage for the measurement probe(s) is
switch selectable for 10 V or 100 V operation to conform to the
individual requirements of the ANSI/ESD Association standards
and testing conditions. The selected test voltage is indicated on
the LCD display. The light-weight portable unit is operable via
batteries or an AC line power source with a battery eliminator.
STM11.12 for volume resistance (IEC 61340-
2-3), STM12.1 for seating,
a
!
pre-amplfier eliminates
interference and enables
reliable operation at high
resistance values
!
Exceptional accuracy,
stability, & repeatability
!
Complies with ANSI/ESD
Association standards
!
Wide measurement
3 13 ranges of 10 to 10 Ω
!
Elastomer electrodes for
excellent surface contact
!
Battery or AC line
operated with automatic
shutoff
!
Light-weight and
portable
!
Variety of probe types
available
!
Optional Accessories
include Walking Test
Adapter and Test Plate
Set
!
compliant
Concentric ring probe
Model 152P-CR-1
Surface / Volume
Resistance Probe
Model 152-1 Surface / Volume
Resistance Meter
Model 152P-2P
Two Point Resistance
Probe
Model
152BP-5P
Point-to-Point
Probes
152AP-3mm x
25.4mm
Resistance Probes
Measurement and Power Solutions
TM
www.trekinc.com