Uncle Milton Star Theater Pro - Manual (Page 5)

Figure 3
Figure 4
Figure 5
Figure 2
Figure 1
6.5’ to 7.5’
HOW TO POWER THE PROJECTOR
The planetarium is powered by batteries (not
included) or the included AC adapter.
BATTERY POWERED OPERATION
The projector requires three (3) “AA” alkaline
batteries. Do not use rechargeable batteries.
• Remove battery compartment cover located
underneath the base (Figure 1).
• Insert three (3) “AA” alkaline batteries. Make
sure the “+” and “–” ends are inserted
correctly, as indicated in battery
compartment.
• Replace battery compartment cover.
• Insert battery power cord plug into power jack
(Figure 2).
AC POWERED OPERATION
• Insert AC adapter plug into power jack (Figure 3).
• Plug AC adapter into an electrical outlet.
BASIC OPERATION
1. Place the planetarium on a stable surface such
as a tabletop. Optimal projection distance is 6.5
to 7.5 ft (2 to 2.3m) (Figure 4).
2. Make sure that the projector is powered for
operation by either batteries or AC adapter (see
above).
3. Open image disc tray by pressing the open
button (Figure 5). Insert an image disc, making
sure disc is right-side-up, with the “© UMI”
inscription centered between the two front
tabs. Close image disc tray manually until it
clicks (Figure 6).
4. Remove lens cap (Figure 7).
5. Press ON/OFF button so that the LED indicator
glows red (Figure 8). Darken the room to
project the night sky onto a flat, white surface.
6. You can listen to planetarium background
music by playing the included CD in a CD
player.
5