SoundMax SM-2501 - Manual (Page 4)

4
Alarm operations
Alarm setting
•
Press and hold ALARM button.
• At this time press HOUR button and MIN button respectively to set alarm time.
• Then release ALARM button to return to the normal time display.
• Press the ALARM button to show the alarm time.
Alarm function setting
•
Slide ON/OFF/AUTO/ALARM switch to “AUTO” to select the alarm signal – the radio, or “BUZZ” to select the alarm signal – the
buzzer. When the alarm function is on, the AUTO indicator will light on.
When the time is the same as the alarm time, the buzz or radio sound will be heard. It will turn off in 59 minutes automatically.
• Press the ALARM button to stop the alarm.
• The alarm will start again at the same time next day. To turn it off slide the ON/OFF/AUTO/ALARM switch to “OFF” position.
Snooze control
• If press SNOOZE button when the alarm sound is on, the sound will stop temporarily, after 9 minutes, the alarm sound continue to
sound.
Maintenance and care
• Switch off the appliance, unplug from the power supply.
• The outside of the appliance can be cleaned with a slightly damp cloth.
• Avoid leaving the clock radio in direct sunlight or in hot, humid, dusty places. Keep the set away from heating appliances and
appliances that generate noise, such as fluorescent lamps and motors.
Specification
Power supply 220 V, 50 Hz
Stabilizer Quartz
Display 0.6”
LED
Net / Gross weight 0.35 kg / 0.4 kg
Gift box dimension (L x W x H) 138 х 52 х 138 mm
Radio frequency
FM 64-108 MHz
AM 530-1600 KHz
RMS 300 mW
Specifications are subject to change without notice. Mass and dimension are approximate.