Alarm operation, Maintenance and care – SoundMax SM-2503 User Manual

Page 4

Advertising
background image

4

Antenna

The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best
recep
tion.

For FM reception, this set is specially equipped with an external wire as FM antenna. Be sure to untwist it to its fullest
len
gth for peak performance.

Alarm operation

Setting the alarm

Press and hold ALARM button. do not release it.
At this time press HOUR and MIN buttons respectively to set alarm time.

Release ALARM button to return to the normal time display.
Slide AUTO/OFF/ON switch to AUTO position.

The radio will play automatically at the present time.
To turn it off slide AUTO/OFF/ON switch to OFF position or press ALARM OFF button.

Alarm sound setting

Follow the steps of “Setting the alarm”.

Slide the Volume regulator to minimum level until you hear the click.
You will be awaked by the buzzer alarm.

To turn it off slide ON/OFF/AUTO/ALARM switch to “OFF” position or press ALARM OFF button.

Snooze control

When the alarm is on, press SNOOZE set once, after 8 minutes the alarm will be on again.
If you want to stop the alarm, slide ON/OFF/AUTO/ALARM switch to “OFF” position or press ALARM OFF button.

Sleep and wake to music

Follow the steps of “Setting the alarm” paragraph.

Follow the steps of “Sleep to music” paragraph to set the desired period of radio playing before sleep.
The radio will stop automatically and will start again at the preset wake up time.

Maintenance and care

Switch off the unit, unplug from the power supply. The outside of the unit can be cleaned with a slightly damp cloth.
Avoid leaving the clock radio in direct sunlight or in hot, humid, dusty places. Keep the set away from heating

appliances and appliances that generate noise, such as fluorescent lamps and motors.

Advertising