Power supply, Radio operation, Connections – Hyundai H-1603 User Manual

Page 3

Advertising
background image

3

Power supply

Battery operation

· Open the battery compartment cover.

· Insert 3 batteries (UM1, 4.5 V). Please observe correct battery polarities or the set will not work.

· Close the battery compartment cover.

· When the batteries are exhausted, they should be removed from the set to prevent leakage.

AC operation

· The appliance is for household use only.

· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.

· Insert the plug into the power supply.

Radio operation

· Select your desired broadcasting band with Band switch.

· Rotate the Tuning control regulator to receive the desired broadcast.

· The Tuning Indicator will light up when the correct station is received and the station signal is sufficiently strong.

· Adjust the level of sound with Volume control regulator.

· Move the Tone switch to choose one of the four tones.

· If you want to turn on the radio or make the volume louder, turn the Power switch/Volume control clockwise. If you want to turn off the radio or make

the volume lower, turn the Power switch/Volume control counter-clockwise.

Antenna

· For FM reception, use the telescopic antenna. Pull out the antenna and change its length and angle for the best reception.

· For SW reception, use the telescopic antenna. Pull out the antenna and keep it vertical to get the best reception.

· The MW antenna is magnetic bar within the system. Rotate the unit to get the best reception.

Connections

Stereo headphone connecting

· For private listening radio, insert 3.5 mm headphone into the stereo headphone jack.

· Adjust volume control to the appropriate level as desired.

· When the stereo headphone jack is plugged, speakers will disconnect automatically.

Advertising