Features, Overview – Velleman VDSMP33 User Manual

Page 4

Advertising
background image

VDSMP33

V. 02 – 09/03/2012

4

©Velleman nv

4. Features

MP3 player desk for USB/SD card

scratch, brake and reverse effect, and re-loop function

16% pitch control

2 universal SD card and 2 USB ports

multifunctional display with ID3 TAG

SD card / USB / Phono / Line / Mic input

jog searching

single and continuous play mode

2 channel RCA master output & 2 channel REC outputs

2 channel mixer & 3 band EQ control.

5. Overview

Refer to the illustrations on page 2 of this manual.
Note that the device has a dual lay-out, left and right parts are similar. Most buttons and indications on the top

panel are present twice.

1 power

switch: turn the mixer on or off.

2

POWER SUPPLY INPUT: connect to 230VAC/50Hz power source

3

GND (ground) connection: when buzzing occurs, connect to turntables to create earth connection.

4

BALANCED MASTER OUT output: audio output signal connectors (XLR, symmetrical)

5

PHONO/LINE INPUT: connect an external device (not incl., e.g. turntable, CD player...) to these RCA

(cinch) connectors. Phono1/line1 = channel 1, Phono2/line2 = channel 2.

6

PHONO/LINE switches: set to PHONO if a turntable (not incl.) is connected to the input; otherwise set

to LINE.

7

LINE OUTPUT (REC/AMP): unbalanced outputs - connect a recording device (not incl.) to the REC
output
; connect an amplifier (not incl.) to the AMP output.

8

Headphone jack: plug a headphone plug into this 6.35mm jack for audio monitoring. Headphone

impedance must be >32Ω. Signal to headphone is independent from output to amplifier.

9

CUE LEVEL control: adjust the output level of the headphones

10

CUE CROSS FADER for headphone output: moving the slider from left to right will fade in channel 2

(louder) while fading out channel 1 (more quiet). In the middle position, both channels are played at

equal volume through the headphones

11 BASS: microphone equalizer for low tones

12 TREBLE: microphone equalizer for high tones

13 MIC

LEVEL: adjust the microphone input level

14 MICROPHONE

INPUT: 6.35mm microphone input (microphone not incl.)

15 display:

Liquid Crystal Display.

16 SD card slot: insert an SD card into these slots.

17 USB

port:

insert a USB storage medium to these ports.

18 LOW

control: adjust the volume for low tones

19 MID

control: adjust the volume for mid tones

20 HIGH

control: adjust the volume for high tones

21 SD-USB/PHONO-LINE switch: slide to the left to select SD card or USB input; slide to the right to

select PHONO/LINE input from the connectors at the back

22 GAIN: channel volume control

23 MASTER

LEVEL: master volume control

24 SD/USB

button: press once to select SD card audio source; press again to select USB.

25 FOLDER/TRACK button: press to switch between folder and track searching. If the LED is on, folder

mode is enabled. If the LED is off, track mode is enabled.

Advertising