Velleman VDL800SMT2 User Manual

Page 4

Advertising
background image

VDL800SMT2_v5

VELLEMAN

4

Press the TIMER ON/OFF button on the remote; the LED above the button should light, indicating activation of
the function.

You may now set the INTERVAL and DURATION adjustment knobs to the desired position.

Notes: INTERVAL: time between bursts of fog.

DURATION: time that the fog machine will run during the burst.

1.

interval adjustment

2.

duration adjustment

3.

timer LED

4.

manual momentary LED

5.

manual/power LED

6.

manual control momentary button

7.

timer latching button

8.

continuous latching button


You can also make the machine burst fog by holding the FOG button at the back of the machine pressed.

6. Cleaning and Maintenance


1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)

should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections…

3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the fuse (see “4. Installation”).
8. Contact your dealer for spare parts if necessary.
9. Clean the heating element every 30 hours of use with a special cleaning liquid available from your dealer (order

code VDLCL). Fill the tank with 1/3 of the bottle of cleaning liquid and let the machine run for a while. When the
device is cleaned, remove the remaining cleaning liquid and rinse the tank thoroughly with distilled water. Never
use regular water for cleaning or rinsing!

10. Clean the device every 20 hours of use.

7. Technical Specifications


Power supply

max. 230VAC/50Hz

Power consumption

max. 800W

Fuse

F 5A, 250VAC (5 x 20mm) (order code FF5N)

Smoke output

100m³/min

Warm-up time

approx. 4 minutes

Smoke liquid consumption

approx. 25ml/min

Tank capacity

0,75 litres

Dimensions

340 x 190 x 190mm

Total Weight

3kg

Max. Ambient Temperature

45°C

Max. Housing Temperature

130°C


Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product, please
visit our website www.hqpower.com. The information in this manual is subject to change without prior
notice.

Advertising