Velleman VTLAMP5W - Manual (Page 3)

VTLAMP5W
V. 02 – 08/02/2013 3 ©Velleman nv
3. Hold the lamp at the plastic ring and disconnect the lamp from the connector. Pull on the connector,
not the cables. Take out the defective lamp.
4. Install a new lamp (order code LAMP5W) and insert the connector.
5. Put the diffuser back and fasten the screws.
6. Maintenance
 Unplug the device from the mains and let the lamp cool down before maintenance.
 Wipe the device with a moist soft cloth. Do not use abrasive solutions or solvents.
7. Technical specifications
dimensions height: 35 cm
base: Ø 17 cm
lamp holder: Ø 14 cm
ratings 230 Vac / 12 W
weight 1.45 kg
replacement lamp LAMP5W
spare magnifying glass cover VTLAMP5W/SP1
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.