Velleman VDPLP703RGB - Manual (Page 7)

VDPLP703RGB
V. 01 – 19/11/2013 7 ©Velleman nv
When all devices have the same address, all the units will “listen” to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will “listen” to a separate channel
number. Changing the settings of one channel will only affect the device in question.
In case of the 7-channel mode, you will have to set the start address of the first unit to 1 (CH1–7),
the second to 8 (1 + 7) (CH8–14), the third to 15 (8 + 7) (CH15–21), and so on. The highest start
address is 506.
To set the device to work with a DMX controller:
1. Connect the DMX controller to the DMX input of the device.
2. Press MENU.
3. Press UP or DOWN until <Addr> is displayed and press ENTER.
4. Use UP and DOWN to set the DMX starting address (A001–A512) and press ENTER.
5. Press MENU to quit.
DMX Channel Values
7 channel mode:
Channel From To Description
1 0 255 Main dimmer 100–0 % for channel 2–4
2 0 255 Red 0–100 %
3 0 255 Green 0–100 %
4 0 255 Blue 0–100 %
5
0 14 Off
15 255 Selection of predefined fixed colours
6 0 255 Strobe speed slow to fast
7
0 5 No function: the device works according to the settings of channel 1–6
6 240 Fading colours, speed slow to fast
241 254 Switching colours, speed slow to fast
255 255 Off
8. Cleaning and Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
9. Technical Specifications
number of LEDs 7 x 3 W RGB
power supply 230 VAC 50 Hz
power consumption 23 W
luminous flux 450 lx @ 2 m
DMX channels 7 channels
dimensions 200 x 140 x 170 mm
weight 1.6 kg