Velleman VSC1 - Manual (Page 3)

VSC1 VELLEMAN 3
VSC1 – SCANNER CONTROL BOX
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a Velleman product! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
"AUTO"-operation is activated
: green LED is lit
"MAN"-operation is activated : red LED is lit
Device is OFF : no LEDs are lit
Special screw terminal with detachable connector in order to facilitate the installation of the device.
2. Technical Specifications
Pan Control
"LEFT/RIGHT" paddle switch
Power Supply "MAN/AUTO/OFF" rocker switch
Input Voltage 220-230VAC
Output Voltage to Scanner 24VAC
Operating Temperature -5 to +60°C
Connector Detachable screw terminal
Material & Colour Steel, off-white
Dimensions 212mm (D) x 218mm (W) x 45mm (H)
Weight 1.0kg
3. Controls
FRONT PANEL
1. Power : Place the rocker switch in the "AUTO"-position to make the green LED light up. The scanner will now
make all necessary left-right adjustments automatically. Put the rocker switch in the "MAN"-position to
make the red LED light up. The position of the scanner will now have to be adjusted manually. No
LEDs are lit if the device is OFF.
2. LEFT and RIGHT : paddle switch used to make the scanner turn to the left or right.