Velleman VDP7510S2 User Manual
Page 4
VDP7510S2_v4
HQPOWER™
4
6. Operation
•
Power-Up
Connect the blinder to the mains. The red LED will light and the blinder will automatically self-test.
The blue signal indicator LED will only light in DMX mode. Refer to the table below to set the DIP
switches.
1
2
3
4
5
6
7
8
9 10 11 12
ON
OFF
OFF = 0, ON = 1
Address code 10 – 11 – 12 is to select the required mode.
000 = DMX mode
001 = MASTER/SLAVE mode – auto mode
010 = MASTER/SLAVE – audio mode
011 = STAND-ALONE – auto mode
100 = STAND-ALONE – audio mode
101 = MASTER/SLAVE – auto + audio mode
110 = STAND-ALONE – auto + audio mode
111 = BLACKOUT mode
•
DMX Mode
Set the address (1 to 511) using DIP switches 1 to 9.
DIP
switch
1
2
3
4
5
6
7
8
9
Address
1
2
4
8
16
32
64
128
264
The DMX LED will flash when the unit receives a DMX signal.
Channel From
To Description
1
0
40 All lamps are off.
41
70 10-channel mode: each lamp controlled separately.
71
100 5-channel mode: 2 lamps per channel.
101
130 2-channel mode: 5 lamps per channel.
131
160 1-channel mode: 10 lamps per channel.
161
190
4-channel mode:
channel 1 = built-in modes
channel 2 = built-in programs
channel 3 = brightness
channel 4 = speed
191
220
3-channel mode:
channel 1 = built-in modes
channel 2 = built-in programs
channel 3 = brightness
221
255
4-channel mode:
channel 1 = built-in modes
channel 2 = built-in programs
channel 3 = brightness
channel 4 = speed
•
Master Mode
Select any of the 16 built-in programs using DIP switches 1 to 4.
o
Auto Mode