Velleman VDL3002HC User Manual

Page 3

Advertising
background image

VDL3002HC Rev.

04

10.06.2010

©Velleman nv

3

• Do not use the device if the ambient temperature exceeds 45°C. The max. temperature for the

housing is 130°C

• Familiarise yourself with the functions of the device before actually using it. Do not permit operation

by unqualified people. Any damage that may occur will probably be due to unprofessional use of the

device.

• Use the original packaging if the device is to be transported.

• Note that all modifications of the device are forbidden for safety reasons.

• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,

electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the

warranty.

4. Lamps

• Disconnect the power supply before removing or replacing the lamps.

• Make sure the lamps have cooled fully before attempting to remove them. Never touch a quartz bulb

with your bare hands. If you accidentally touch it, you should wipe the bulb with a lint-free cloth

moistened with methylated spirit.

• Only use this lamp in equipment specifically designed for this type or rating of lamp. For certain critical

applications, we recommend the use of lighting equipment fitted with a glass cover or protective

shield. The manufacturer and distributor will not accept liability for injuries or damage resulting from

incorrect use of the lamp or from failure to use the correct equipment.

• Replace a damaged or thermally deformed lamp.

Procedure

• Loosen the three screw knobs on the side of the cover and carefully push the two LAMP300MR bulbs

(300W / 230V) into the sockets (do not touch the bulbs with your fingers). Close the cover and tighten

the screws.

• Put the plug in a 230V-socket. The VDL3002HC starts to gyrate.

• Adjust the sensitivity with the knob on the side of the VDL3002HC.

5. Technical specifications

power supply

230VAC ~ 50Hz

lamp 2

x

LAMP300MR (300W/230V, incl.) or 2 x LAMP300 (Osram

®

300W/230V)

fuse

F 5A, 250VAC (5 x 20mm) (order code FF5N)

dimensions

Ø 340 x 450mm

total weight

3.5kg

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulted from (incorrect) use of this device. For more info

concerning this product and the latest version of this manual, please visit our website

www.hqpower.eu. The information in this manual is subject to change without prior notice.


© COPYRIGHT NOTICE

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.

No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.

Advertising