Velleman VDPCRGB3 - Manual (Page 5)

VDPCRGB3
10.01.2011 ©2009 Velleman nv 5
6. DIP switch settings
• The controller can work in 2 modes:
o DMX mode
o internal program mode
DMX mode
• To enable DMX mode, switch 10 must be set in the OFF position.
• Switches 1 ~ 9 determine the DMX starting address. The address is
determined by the switches in the ON-position. E.g.:
Switches 1, 3 and 6 are ON. The address becomes:
switch value
1 001
3 004
6 032
total: 037
The DMX address for this example is 037.
Built-in programs
• To enable the internal program mode, switch 10 must be set in the
ON position.
• The other switches determine the current program.
switch position program
1 ON red
2 ON green
3 ON blue
4 ON yellow
5 ON purple
6 ON cyan
7 ON white
8 ON changing colours (adjustable speed)
9 ON fading colours (adjustable speed)
• When in changing or fading colours mode, the changing or fading
speed is determined by switch 1~7.
o switch 1 ON: slowest speed
o switch 7 ON: fastest speed.
Note: When multiple speed switches are set, the highest setting will
be used.