Technical specifications – Velleman PROMIX50S User Manual

Page 4

Advertising
background image

PROMIX50S Rev.

01

25.02.2010

©Velleman nv

4

9 - HEADPHONE INPUT JACK
Stereo input jack for headphones (∅ 6.35 mm). Verify if the rotary is under 5 before connecting. The output power is

150 mW/8 Ω.

10 - HEADPHONE LEVEL

Used for adjusting the level of the phone's output signal.

D. BACK PANEL

11 - MASTER OUTPUTS
These unbalanced cinch outputs can be connected to any power amplifier. The output voltage suffices to drive any power

amplifier.

12 - GROUND CONNECTOR
To connect 1 or 2 turntables to the ground connectors.


13 - INPUT CONNECTORS

These RCA connectors can be connected to the 3 CD/LINE and the 2 PHONOS. The jacks should be connected to
microphones.

14 - AC INPUT CONNECTOR
AC input connector for the PSU.

5. Technical specifications

inputs
MIKE

(DJ)

1

mV/1k

PHONO (CH1 – CH2)

3 mV/50k Ω (RIAA)

CD LINE (CH1 – CH3)

150 mV/100k Ω

output (MASTER)

1.5 V/600 Ω (nom.)

harmonic distortion

0.02 % (@ nom. output level)

frequency response

20 Hz ~ 20k Hz ± 0.5 dB (RIAA ± 2 dB)

S/N ratio

MIKE

(DJ)

70

dB

PHONO 70

dB

CD LINE

80 dB

phones

max. 200 mW/8 Ω

voice-over

-14 dB max. @ 1k Hz

power supply

12 VAC/300 mA PSU (incl.)

dimensions

232 x 120 x 32 mm

weight 750

g

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage

or injury resulted from (incorrect) use of this device. For more info concerning this product and the latest

version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to

change without prior notice.


© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.

No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.

Advertising