Velleman VTLAMP9 - Manual (Page 3)

VTLAMP9
19.05.2010 ©Velleman nv 3
3. General Guidelines
Refer to the Velleman ® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme heat.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
4. Features
• lamp (optional): LAE1B3A, LAE1C3A, LAE1C3H, LAE1D3A, LAE1F3H
• optional: stand with wheels (white) – VTLAMPST, table stand (white) - VTLAMPST1
5. Use
Refer to the illustration on page 2 of this manual.
• Open the table clamp [1] by twisting the nut [1a] counter clockwise.
• Place the base [1c] on a suitable and solid horizontal or vertical surface capable of carrying the weight
of the lamp. Do not attach to round objects e.g. tubes.
• Twist the nut [1a] clockwise until the jaw [1b] clasps the base [1c] securely to the surface.
• Slide the stem of the lamp into the hole on top of the clamp. Note: the stem must always be vertical in
such a way that the weight of the lamp is resting on the clamp [1].
• Screw a suitable lamp (not incl., E27, max. 60W) into the lamp socket.
• Plug the power cable into a suitable mains outlet.
• Switch on the lamp with the On/Off button on the power cable.
• Be extremely cautious when sunlight passes through the magnifying lens – the heat will be focussed in
one point creating a fire hazard.
6. Replacing the lamp
• Unplug the device from the mains and let the lamp cool down before replacing it.
• Unscrew the light bulb from the socket and replace it with a new one.
• Make sure the switch is in the off-position and plug the power plug into the mains.
7. Maintenance
• Unplug the device from the mains and let the lamp cool down before maintenance.
• Wipe the device with a moist soft cloth. Do not use abrasive solutions or solvents.
8. Technical specifications
power supply 230Vac / 50~60Hz
lamp E27, max. 60W
magnifier 3 dioptre
weight ±1100g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this user manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright holder.