Velleman VDPL300BA - Manual (Page 6)

VDPL300BA
V. 02 – 25/09/2012 6 ©Velleman nv
Channel Function From To Description
5 Tilt
0 135 Forwards rotation from 0 to 100 %
136 139 Stop
140 255 Backwards rotation from 0 to 100 %
DMX Start Address
•
All DMX-controlled devices need a digital start address so that the correct device responds to the signals.
This digital start address is the channel number from which the device starts to “listen” to the DMX
controller. The same starting address can be used for a whole group of devices or an individual address can
be set for every device.
• When all devices have the same address, all the units will “listen” to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you
set individual addresses, each device will “listen” to a separate channel number. Changing the settings of
one channel will only affect the device in question.
• In case of the 5-channel VDPL300BA, you will have to set the start address of the first unit to 1 (CH1~5),
the second unit to 6 (1 + 5) (CH6~10), the third to 11 (6 + 5) (CH11~15), and so on.
7. Cleaning and Maintenance
• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
• Moving mechanic parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
8. Technical Specifications
power supply max. 230 VAC / 50 Hz
power consumption 25 W
fuse F2A, 250 VAC (5 x 20 mm) (order code FF2N)
DMX512 5 channels
connection 3-pin XLR
LEDs 48 pcs (24 x red, 12 x green, 12 x blue)
dimensions 370 x 210 x 140 mm
total weight 3.7 kg
max. ambient temperature 45°C
max. housing temperature 50°C
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.