Velleman VDP5RBMH - Manual (Page 5)

VDP5RBMH
V. 04 – 07/01/2014 5 ©Velleman nv
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 6" (± 15 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
• Mechanical wear and LEDs are not covered by warranty.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
• This device is designed for professional use on stage, in discos, theatres, etc..
• Use the appropriate power supply (see Technical Specifications below).
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
• There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.
• Use the original packaging if the device is to be transported.
• Keep this manual for future reference.
4. Features
• high power moving head with Philips 5R lamp (see Technical Specifications)
• 14 colours + white
• 17 gobos + open
• with 8-facet prism, frost, and automatic zoom
• DMX controlled by 20 channels
• with master/slave and stand-alone mode
• pan (540°) and tilt (270°), self-correcting
• high-transmittance Fresnel lens, resistant to high temperatures
5. Overview
Refer to the illustrations on page 2 of this manual.
1 Power indicator 10 Fuse holder
2 DMX mode indicator 11 DMX 5 pin in
3 Display 12 DMX 5 pin out
4 Enter button 13 DMX 3 pin in
5 Down button 14 DMX 3 pin out
6 Up button 15 Fast-lock mounting bracket
7 Menu button 16 Safety bracket
8 On-off switch 17 Transportation lock
9 Neutrik powerCON in