Velleman LPTJUNIOR - Manual (Page 2)

LPTJUNIOR 2 VELLEMAN
4. Function Description
a. Control Panel
1. Channel/scene LEDs
2. Channel faders
3. SUB scene hotkeys
4. LCD display
5. Scene key (SC)
6. Channel setting key (CH)
7. Function key (FUNC)
8. Record scene key (REC)
9. Master LED
10. Clear key (CL)
11. Number/letter keys
12. Channel value key (AT)
13. Range selection key (-)
14. Confirmation key ('ENTER')
15. Down key (▼)
16. Up key (▼)
17. Master fader
18. Master dimming key
b. Back Panel
19. Power switch
20. Power connector 15V/1A
21. Audio input max. 100mV (-10dB)
22. DMX signal connector: XLR 5-pin DMX in
23. DMX signal connector: XLR 5-pin DMX out
5. Connections
• Connect a 15Vdc/1A adapter to the device - mind the polarity! - and plug the adapter onto the mains.
• Make all connections with the appropriate cable type, set all controls to 0 and switch the device on (#19 above).
The manufacturer or dealer will not be held responsible for damage caused by improper connections.
• After switching on the device, set the master fader (#17) to 10 to have a 100% range with the other faders.
• Let the built-in battery charge for approx. 4 hours before using the device for the first time.
• The device will automatically store all settings before powering off.
• All data will be lost if the device is not switched on for 7 days.
6. Operating Instructions
a. Function Menu
Press the function key (#7) ; you will obtain this screen:
→ CH
SETTING
SUB
MASTER
In fact this menu consists of the six submenus at the right; you can navigate
up and down this menu with the ▲ (#16) and ▼ (#15) keys.
→ CH SETTING
SUB MASTER
CHANNEL CHASE…
SUB CHASE…
AUTO FADE …
CHASE FADE …
Fig. 1
Fig. 2