Velleman VDPSCS-STICKCOM - Manual

STICK-COM+
Package contents
*
Installation
Ethernet add-on
IR Remote
Control
Setup
• IR remote control
• Ethernet add-on to be connected at the back of the STICK
controller
* compatible with STICK serial number > 1000 only
• Connect the add-on on the black connectors at
the back of the STICK controller
• Establish a connection with a WIFI router using a
RJ45 cable
• Start the TOOLS program and open the “Ethernet
configuration” tab
• Select “Enable Ethernet”
• Select “DHCP” is your router is compatible
• Specify an IP address for the STICK controller if your router is
not DHCP (Gateway is the IP address of the router)
• Specify a name for the STICK controller and a password if you
want to secure the access
Smartphone
WIFI