Velleman EHD2 - Manual (Page 4)

EHD2
08.04.2011 ©Velleman nv 4
5. Assembly
Refer to the illustration on page 2 of this manual.
• Place a foot [1] on either side of the bottom of the heater and fix using the included screws.
6. Use
Refer to the illustration on page 2 of this manual.
•
Choose a suitable location taking into account the safety instructions above.
• Turn the thermostat [3] fully counter clockwise and insert the plug [2] into a suitable, grounded
mains socket.
• Turn on the heater elements by means of the rocker switches [4] as desired. Turn the thermostat
[3] clockwise. When the desired room temperature has been reached, the pilot lights [6] on the
switches [4] will go out. The heater will now keep the room at set temperature by switching on and off
automatically.
REMARK: There may be a particular smell when the heater is turned on after a long period of time. This is
perfectly normal.
• To reach the desired room temperature faster, switch on the turbofan using the rocker switch [5].
7. Cleaning and Storage
• Unplug the heater and let it cool down before cleaning.
• Clean the housing with a slightly damp cloth. Wipe off with a soft cloth.
• Do not use detergents or abrasive cleaning products.
• Protect the heater from dust and store in a clean and dry place.
8. Technical Specifications
colour black
input voltage
230VAC~50Hz
heating power settings 1000W / 2000W
power cord length 1.5m
dimensions 600 x 350 x 100mm
weight 2.8kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this user manual, please visit
our website www.perel.eu .
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.