Velleman LEDC11 - Manual (Page 3)

LEDC11
V. 01 – 28/03/2013 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Vellight! Please read the manual thoroughly
before bringing this device into service. If the device was damaged in
transit, don't install or use it and contact your dealer.
2. Features
 ideal for use with LED strips. See www.perel.eu
 functions:
o switching: on-off
o dimming: up-down
o built-in stand-alone programs: fading and flashing RGB
animations
o RGB colour selection: 7 colours
 use only with a power supply of max. 144W / 12V or 288W / 24V
3. Overview
Refer to the illustrations on page 2 of this manual.
1 On/Off 6 Power: VCC
2 Increase button 7 Output: VCC
3 Decrease button 8 Output: R
4 Mode selector 9 Output: G
5 Power: GND 10 Output: B
4. Installation and wiring
 First connect the load wire, then the power wire.