Velleman LPTT1202 - Manual (Page 2)

LPTT1202 GB 2
3. General Guidelines
•
This device is a light controller for professional use on stages, in discos, theatres, etc. This
device should only be operated with an alternating current of max. 230Vac/50Hz and is
designed for indoor use only.
•
Do not shake the device. Avoid brute force when installing or operating the device.
•
Select a location where the device will be protected against extreme heat, moisture and dust.
•
Do not use or transport the device under temperatures < 5°C or > 35°C.
•
Familiarise yourself with the functions of the device before actually using it. Do not permit
operation by unqualified people. Any damage that may occur, will probably be due to
unprofessional use of the device.
•
Use the original packaging if the device is to be transported.
•
Note that all modifications of the device are forbidden for safety reasons.
•
Do not remove the serial number sticker from the device as doing so will void the warranty.
Only use the device for its intended purpose. All other uses may lead to short-circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void
the warranty.
4. Front Panel Description
1. SENS
: touch sensitivity adjustment
2. POWER SWITCH : turns the device ON/OFF
3. POWER INDICATOR : this red indicator lights when the device is activated
4. FLASH TOUCH KEY : activates the channel in question when touched
5. HOLD TOUCH KEY : the channel in question is activated when the key is touched
and is deactivated when the key is released
6. OUTPUT INDICATOR : indicates if the channel is active (red LED)
7. CHASE : 3 buttons to select CH1-4, CH5-8, CH9-12 respectively.
8. CHASE INDICATOR : indicates whether the group of 4 channels is selected as an
output in the current chase (red LED)
9. CHASE SPEED : turn the rotary knob to adjust the chaser speed
5. Back Panel Description