Important remarks, Cleaning and maintenance, Technical specifications – Velleman MICW42 User Manual

Page 6

Advertising
background image

MICW42

HQPOWER

6

11. Important Remarks


 Keep the receiver 1m above the ground and 1m away from walls for the best results.

 Turn off your device before changing the batteries.

 Never open the receiver‟s housing.

 Make sure to match the frequency or the channel on your receiver and your microphone / transmitter.

 Use only fresh alkaline batteries as partially drained batteries may cause weak signal reception.

12. Cleaning and Maintenance


1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)

should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not

change the location of the connections.

3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.

6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.

13. Technical Specifications

system

frequency range: UHF 863.000 - 865.000MHz (tunable)

A licence may be required for some frequency bands. Check your local regulations.

modulation mode: FM (PLL)

nominal / peak deviation: ± 25kHz / max. ± 48kHz

frequency stability: max. ± 15ppm

frequency response: 60Hz - 18kHz

S/N ratio at 1mV RF and peak deviation: max. 110dB(A)

THD at nominal deviation and 1kHz: max. 1%

temperature range: -10°C ~ +55°C

receiver

receiver principle: true diversity

sensitivity (peak deviation): 3uV (52dB S/N)

AF output voltage at peak deviation and 1kHz AF out: balanced: +10dB (XLR),
unbalanced: +4dB (1/4" jack)

F/N ratio: max. 80dB

P/N ratio: max. 80dB

transmitter

RF output power: 1mW

RF squelch: max. 50dB

power
supply

receiver: 14VAC/500mA (adapter incl.)

transmitter: 2 x 1.5V AA batteries (incl.)

dimensions

receiver: 210 x 190 x 42mm

transmitter: Ø50 x 255mm

weight

receiver: 1.142kg

transmitter: 411g

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.

For more info concerning this product, please visit our website www.hqpower.com.

The information in this manual is subject to change without prior notice.

Advertising