Velleman LX106 - Manual (Page 8)

LX106/LX107
V. 05 – 15/05/2013 8 ©Velleman nv
10 channel mode:
Channel From To Description
1 0 255 Dimmer 0 – 100 %
2 0 255 Red 0 – 100 %
3 0 255 Green 0 – 100 %
4 0 255 Blue 0 – 100 %
5 0 255 White 0 – 100 %
6
0 10 No function
11 30 Red 100 % Green 0 – 100 % Blue 0 %
31 50 Red 100 – 0 % Green 100 % Blue 0 %
51 70 Red 0 % Green 100 % Blue 0 – 100 %
71 90 Red 0 % Green 100 – 0 % Blue 100 %
91 110 Red 0 – 100 % Green 0 % Blue 100 %
111 130 Red 100 % Green 0 % Blue 100 – 0 %
131 150 Red 100 % Green 0 – 100 % Blue 0 – 100 %
151 170 Red 100 – 0 % Green 100 – 0 % Blue 100 %
171 200 Red 100 % Green 100 % Blue 100 % White 100 %
201 205 Colour temperature 1 Warm
206 210 Colour temperature 2
211 215 Colour temperature 3
216 220 Colour temperature 4
221 225 Colour temperature 5
226 230 Colour temperature 6
231 235 Colour temperature 7
236 240 Colour temperature 8
241 245 Colour temperature 9
246 250 Colour temperature 10
251 255 Colour temperature 11 Cool
7
0 10 Strobe off
11 255 Strobe slow to fast
8
0 51 No function
52 101 Auto program 1: 15 colours, fading 0 % – 100 % – 0 %
102 152 Auto program 2: 15 colours, fading 0 % – 100 %
153 203 Auto program 3: 15 colours, fading 100 % – 0 %
204 254 Auto program 4: colour macros, fading
255 255 Auto program 5: loop running the above programs
9 0 255 Auto program speed slow to fast
10
0 51 Default dimmer speed
52 101 Linear dimmer off
102 152 Non-linear dimmer 1
153 203 Non-linear dimmer 2
204 255 Non-linear dimmer 3
8. Cleaning and Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.