Velleman LEDC14 - Manual (Page 5)

LEDC14
V. 01 – 28/03/2013 5 ©Velleman nv
Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
For dimmer mode, wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, press
.
Dimmer mode
 To increase brightness, press
.
 To decrease brightness, press .
7. Technical Specifications
power supply 12 - 24 VDC
maximum load 3 x 4 A
PWM frequency ± 900 Hz