Velleman CBAL10 - Manual (Page 4)

CBAL10
00 (15/12/2008) 4 Velleman ®
4. Features
• portable design, ideal for travelling, shopping, at home ...
• large 5 digit display
• low battery and overload indication, auto zero tracking
• auto power off
• stainless steel handle and hook
• changeable units Kg / Lb / Oz
5. Use
Refer to the illustration on page 2 of this manual.
• Switch on the scale with the ON/OFF button [E].
• Select the appropriate unit (kilogram, pound or ounce) with the unit
button [D]. The unit is indicated on the display [B].
• Hold the handle [A], and attach the load to the hook [F]. Holding
the plastic housing while weighing will affect the accuracy.
• Lift the load off the ground. The weight is indicated on the display
[B]. Wait to read the weight until the load is stable and HOLD is
indicated on the display. When the display shows Err, the load
exceeds the capacity of the scale.
• Use the tare button [C] to reset the scale to zero with attached load
(e.g. container for weighing bulk).
• Press and hold the tare button [C] to display the temperature (°C
only). To clear the display, press the ON/OFF button [E].
• The scale will switch of automatically after about 2 minutes when no
activity is detected.
• When the low battery indicator is displayed, replace the batteries.
• Remove the batteries when the device is not used for a long time.
6. Battery
• To replace the battery, slide the battery cover on the back of the
scale open.
• Insert three new AAA-batteries in the battery compartment. The
polarity is indicated inside the compartment.
• Do not attempt to recharge non-rechargeable batteries and do
not throw in fire as they may explode.
WARNING: handle batteries with care, observe
warnings on battery casing. Dispose of batteries in
accordance with local regulations.
Keep batteries away from children.