Velleman MVR4 - Manual (Page 7)

MVR4
V. 02 – 28/11/2013 7 ©Velleman nv
Repeating tracks or recordings
1. Make sure the device is in music playback or recording playback
mode.
2. Press and hold button M until ALL appears on the display.
3. Press
or to set the repeat setting:
o
Select to repeat one track
o
Select to repeat all tracks
o
Select to turn off repeat.
4. Press the PLAY button to confirm.
EQ mode (equalizer)
1. Make sure the device is in music playback or recording playback
mode.
2. Press and hold the M button until the repeat option appears and
now press the M button again to display EQ.
3. Press or to select an equalizer preset
4. Available presets are: NOR (natural), ROCK (rock), POP
(popular), CLASSOL (classical), SOFT (soft), JAZZ (jazz), DBB
(bass)
5. Press the PLAY button to confirm.
5.8
Device settings
Locking the device
1. Slide the switch on the side of the device to HOLD.
o
HOLD appears on the screen for about 2 seconds.
o
LOCK appears next to battery indicator when the device is
locked.
o
No w except the red dot button, all buttons are disabled. You
can see the LOCK indicator next to battery indicator of the
HOLD switch is on.
Turning the LED indicator on or off
1. Make sure recording is stopped or paused.
2. Press the M button once (ON LED will appear on the display).
3. Press the button
to select ON or OFF.
4. Press the PLAY button to confirm.
Switching betwee n high quality and low quality recording
1. Make sure recording is stopped or paused.