Velleman DVR8H3 - Manual (Page 14)

DVR8H3
V. 01 – 24/10/2013 14 ©Velleman nv
3. In zoom mode, click and drag the red frame at the bottom left of the screen to move to the area you want
to see.
4. To exit, right-click anywhere on the screen.
Note: You need to exit the zoom mode before you can use other DVR functions.
10. Push Video Configuration
10.1 Pin Connection
This DVR can send notifications to your mobile devices, such as iPhone, iPad, and Android mobile devices, if an
an alarm event occurs (push video). However, only certain alarm-in pins support this function.
There are several methods to connect alarm sensors for push video:
via the push video alarm-in terminal
via the external I/O port.
Push Video Alarm-In Terminal
A push video alarm-in terminal is provided on the DVR rear panel. Refer to the table below for the pin
connections that support push video and their corresponding video channels.
Alarm Corresponding video channel
Alarm 1 CH1
Alarm 2 CH2
External I/O port
Refer to the table below for the pin connections that support push video and their corresponding video
channels.
Pin Corresponding video channel
Pin 2 CH1
Pin 15 CH2