Technical specifications – Velleman MICW30A-B-C-D-E-F-G-H User Manual

Page 6

Advertising
background image

MICW30A-B-C-D-E-F-G-H

V. 03 – 03/09/2013

6

©Velleman nv

10. Technical Specifications

See section 1 for applicable frequencies.
system

frequency response: 40 Hz - 15 kHz (+ 3 dB)

frequency stabilization: < ± 30 ppm

dynamic range: > 90 dB

total harmonic distortion: < 0.5 %

audio output level: separate: 0 to ± 400 mV

audio output level: mixed: 0 to ± 200 mV

receiver

power consumption: 4 W

S/N ratio: > 90 dB

spurious image rejection: > 80 dB

sensitivity: 10 dB (SINAD = 30 db)

DE-emphasis: 50 µs

microphone

modulation type: FM F3F

output power: 8.5 mW

max. deviation: ± 25 kHz

spurious emission: > 40 dB

power supply

receiver: 12-17 VDC 300mA (adaptor incl.)

microphone: 1 x 9 V E-block battery (6F22C, incl.)

dimensions

receiver: 180 x 105 x 30 mm

microphone: Ø 51 x 255 mm

weight

receiver: 425 g

microphone: 190 g

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulting from (incorrect) use of this device.

For more info concerning this product and the latest version of this manual, please visit our

website www.hqpower.eu.
The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part

of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise

without the prior written consent of the copyright holder.

Advertising