Velleman ALN011 User Manual
Page 13
4
ENGLISH
4
To activate this function, operate as follows:
- Select the desired channel through the channel selector
- Press the
DW button
- Select the second channel
- Press the button
DW again
- To cancel the function press again the
DW button or the PTT button.
16.
SCAN button: with this control, you can automatically seek for a busy channel.
• Turn the Squelch clockwise until the background noise is no longer heard.
• Press the ''SCAN'' button: the transceiver will scan automatically all the
channels until a carrier is being received.
• When it finds the carrier, it stops and starts again some seconds after the end
of the communication on the channel.
• When the radio is transmitting, the scan function is deactivated.
17. ✩
button: display lighting (temporized).This function allows to operate in darkness
conditions. By pressing this button, the display is lighted for 5 seconds.
18.
Push to talk button (PTT): Its pressure activates the transmission. When it is
released, the receiver is activated.
19.
Battery compartment: insert 6 Ni-Cd alkaline batteries.
20.
Hole for wrist belt
21.
Channel UP: to skip to the next channel. Keeping this button pressed, the
“autorepeat” function is obtained.
22.
Channel DOWN: to skip to the previous channel. Keeping this button pressed, the
“autorepeat” function is obtained.
23.
Battery pack contact: lift the button and take the batteries out (see drawing).
24.
Auxiliary antenna contact: for the connection to the vehicular adaptor.
24
CHAN
NEL
19