Velleman LEDC24 - Manual (Page 6)

LEDC24
V. 02 – 29/10/2013 6 ©Velleman nv
Keep this device away from dust and extreme temperatures. Make
sure the ventilation openings are clear at all times.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Familiarise yourself with the functions of the device before actually
using it.
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Keep this manual for future reference.
4. Installation
Refer to the illustrations on page 2-4 of this manual.
1 DIP switches to select the operating mode
2 DMX input input [C] from external DMX controller:
computer + PC DMX console [A] or stand-
alone DMX controller [B]
3 DMX output to next LEDC24 device in daisy chain
connection [F]
4 terminals
DC+
to 12-24 VDC power supply (+) [E]
DC– to 12-24 VDC power supply (–) [E]
CH1 to LED strip, red (channel 1) [D]
CH2 to LED strip, green (channel 2) [D]
CH3 to LED strip, blue (channel 3) [D]
CH4 to LED strip, white (channel 4) [D]
V+ to LED strip, power [D]
5. Test Mode
In test mode, you can set a static colour, or use changing colours at
different speeds.
Static Colour
To set a static colour:
1. Set DIP switch 10 to ON.