Fig.2 fig.3 fig.4 fig.5 – Velleman KNS1 User Manual
Page 2
Advertising
KNS1
- 2 -
VELLEMAN
3. Prepunched Boards
4. Assembly
The gears (P4-7) should be placed to the left of the pinion gear. One N-shaped nylon connector (P29) should point
downward and the other one upward. Insert the motor as shown in the drawing. Note that the protruding side should
point towards the metal case.
Screw 2 fixing plates (P27/28) to board edges A1 & A2 and screw them to board X BEFORE fitting the gearbox.
Mount the left (V) and right (W) legs to the side boards and install the battery holder (P16) as in the drawing.
Fig.2
Fig.3
Fig.4
Fig.5
Advertising