Velleman DVR4USB User Manual
Page 4
DVR4USB
VELLEMAN
4
5. Hardware Installation
1.
Connect your PC with the network first and plug the
device into the USB port if you desire to monitor through
the IE browser.
2.
Connect the yellow plug with the video signal from the
camera; connect the white plug to the audio signal from
the camera.
3.
Turn on your computer and install the software.
6. Software Installation
After the hardware installation, please turn on your computer. You may be reminded that the computer has found
new hardware. This message can be ignored.
1.
Run setup.exe. The installation procedure will initiate.
2.
Click NEXT.
3.
Select the desired video format and click NEXT.
4.
A window may pop up reminding users whether to
stop or to continue. Click CONTINUE ANYWAY.
5.
Select the desired option and click NEXT.
6.
Click NEXT.
7.
Click FINISH to complete the installation.
8.
After the installation procedure, please reboot your
computer. A shortcut will be created on the desktop.
The information in this manual is subject to change without prior notice.